Ipe woodgrain12′ × 6′ double swing
Aluglobus fence
ALU 50-60 T&G Woodgrain 12x6 ft. Heavy-Duty Pedestrian Gate - Double Swing - NO GAP
ALU 50-60 T&G Woodgrain 12x6 ft. Heavy-Duty Pedestrian Gate - Double Swing - NO GAP
Regular price
$4,075.54 USD
Regular price
Sale price
$4,075.54 USD
Unit price
per
Couldn't load pickup availability
Shipping & Returns
Shipping & Returns
Care Instructions
Care Instructions
Description
This ALU50-60 T&G Heavy-Duty Double Swing Gate combines a contractor-grade 4-inch aluminum frame with horizontal tongue-and-groove infill for a continuous privacy surface. The interlocking T&G profile removes the open slat gap used on ALU20 and ALU40 designs, while 6063-T6 aluminum and the listed AAMA-2604 coating system are built for exterior performance. Explore Ipe, Walnut and Yellow Oak wood-look finishes, plus an ALU60 woodgrain reference. Open any image for a larger view. Tongue-and-groove aluminum profiles interlock edge-to-edge, creating a more continuous surface across both leaves. That is the defining difference of this T&G gate. The privacy effect is designed into the profile itself rather than created by adjustable spaces between separate slats. This Contractor Line gate combines a heavy-duty frame with interlocking T&G infill for a full-privacy horizontal double-swing system. Explore frame strength, hinge support, finish quality and contractor-line assembly details. The 6.3 ALU50 T&G horizontal double-swing gate kit is built around the following frame, panel and hardware components. Finish and post selections should be confirmed for the order. Heavy-duty USA aluminum gate-frame material used to build the two-leaf double-swing structure. Structural corner hardware used to keep the frame connections rigid and square during assembly. Support channel components used as part of the gate-frame and panel assembly. Interlocking tongue-and-groove aluminum infill available in wood-look and solid-color finish options. Includes the listed 5″ 2-way support hinge system, 6′ L-shape gate stopper and basic cane bolt. Includes #10 × 1″, #12 × 2″ BK and #10 × 3/4″ screw sizes. Confirm post and cap selection for the final opening. Review the key frame, panel, post and fastener components used throughout the gate system. Support channel components used within the gate-frame and panel assembly. Tongue-and-groove panel profile shown in a wood-look finish. Tongue-and-groove panel profile shown in a black finish. 8-foot heavy-duty aluminum post with flat press cap. Confirm the post selection required for the site. Stop component used to help define the closed position of the double-swing system. Heavy-duty hinge hardware listed for the two-leaf gate system. Heavy-duty USA aluminum frame material for the double-swing gate structure. Fastener size used within the gate assembly. The T&G system is the NO-GAP privacy option in this product family. Interlocking horizontal profiles create a more continuous surface across both leaves, giving the gate a cleaner, more unified architectural appearance. Interlocking profiles create a more unified surface with fewer visual interruptions across each leaf. Woodgrain finishes bring warmth to the gate while the underlying structural material remains aluminum. A 4″ heavy-duty frame, support channel, corner hardware and 5″ 2-way hinges are built around regular gate operation. Aluminum avoids iron-oxide rust and provides excellent corrosion resistance for exterior gate applications. The structural material is non-combustible aluminum with smoke developed listed as 0. Custom colors and custom sizes are available for non-standard project requirements. See the horizontal T&G layout, proportions and finish at full installed gate scale. The installation sequence focuses on the heavy-duty Contractor Line frame and the interlocking NO-GAP T&G infill used by this gate. Verify finished width, height, post or column conditions, swing direction, grade and required operating clearances before assembling either leaf. Build each leaf square using the heavy-duty frame components, inner corner hardware and the fasteners specified for the kit. Fit the tongue-and-groove profiles so they interlock into the continuous no-gap horizontal surface. Keep both leaves aligned visually. Install and align the heavy-duty 5″ 2-way support hinges so both leaves swing freely without binding. Coordinate the listed gate stopper and cane bolt with the center meeting condition, latch or lock strategy and actual site grade. Verify level, center reveal, closure, fastener tightness and swing clearances on both leaves before putting the gate into regular service. Watch gate construction, finished project details and the horizontal double-swing design in these Aluglobus product videos. Confirm the clear width and height at multiple points. Do not build the gate from a rough opening assumption. Post or masonry conditions need to support the gate leaves, hinge loads and any automation equipment selected for the project. Coordinate Ipe, Walnut, Yellow Oak, Teak, Black or another available custom finish with surrounding fence, cladding and exterior materials. Check vehicles, slopes, walls, landscaping and grade changes through the full arc of each gate leaf. Plan latch, lock, cane bolt, center stop and any access-control hardware before the gate is finalized. If operators are planned, select them based on leaf geometry, weight, wind exposure and the mounting condition rather than adding them as an afterthought. Confirm your opening, post condition, woodgrain or color selection, swing direction and access hardware before ordering. Custom sizes and custom colors are available for projects outside the standard configuration. Answers to common questions about the Contractor Line frame, NO-GAP T&G infill, materials, finishes and included hardware. Factory-direct aluminum gate systems for contractors, builders, architects, designers, homeowners and experienced installers. Nationwide supply and custom project support are available.A 12′ × 6′ no-gap aluminum gate built for privacy and daily use.
NO GAP T&G PRIVACY SYSTEM · DOUBLE SWING
Nominal size12′ × 6′
ConfigurationHeavy-duty double swing
InfillALU50-60 T&G · no gap
Material6063-T6 aluminum
The same heavy-duty double gate in multiple woodgrain expressions.
Ipe woodgrain12′ × 6′ double swing
Walnut woodgrain12′ × 6′ double swing
Yellow Oak woodgrain12′ × 6′ double swing
Woodgrain rangeT&G finish reference
The infill locks together instead of spacing apart.
Heavy-duty ALU50-60 T&G construction, 12′ × 6′ double swing.
Frame strength, hinges, finish and contractor-line assembly details.
Full-frame strengthHeavy-duty gate frame
Panel compatibilityT&G system reference
Exterior finishArchitectural coating
Reinforced hinge supportDouble-swing hardware
Aluminum construction6063-T6 platform
On-site assemblyContractor-line kit
The core gate-frame, T&G panel and hardware package.
24′ 4″ HD gate frame
Inner corner brackets
Channel kit
6.3 ALU50 T&G panels
Heavy-duty support hardware
Fasteners and finishing pieces
Contractor-line hardware and components in one clear view.
Channel kit
6.3 ALU50 T&G panel
Black T&G panel option
2.5″ HD aluminum post
6′ L-shape gate stopper
5″ 2-way support hinge
24′ 4″ HD gate frame
#10 × 3/4″ screws
A cleaner panel look because the horizontal profiles interlock.
Continuous horizontal face
Wood-look aluminum
Contractor-line support
Corrosion-resistant material
Non-combustible aluminum
Custom project options
See the horizontal T&G layout at full gate scale.
Installed gate viewHorizontal double swing
Installation detailT&G contractor-line gate
Build the heavy-duty frame first, then lock in the T&G privacy surface.
Confirm the opening
Assemble the HD frame
Install the T&G panels
Set the hinges
Set stops and closing hardware
Final alignment
See the ALU50-60 T&G gate system in action.
Plan the 12-foot opening as a complete gate system.
Measure finished opening
Confirm structural supports
Choose finish deliberately
Plan both swing paths
Choose access hardware
Coordinate automation early
12′ × 6′ double swing. T&G privacy. No open slat gap.
What to know before ordering the ALU50-60 T&G double gate.
Is this a no-gap privacy gate?
Yes. This product is listed as a NO GAP ALU50-60 T&G gate. The tongue-and-groove profiles interlock to form the horizontal privacy surface, so the adjustable open gaps used on ALU20 and ALU40 slat systems do not apply to this SKU.
Is this the Universal DIY gate or the heavy-duty Contractor Line?
This product is the heavy-duty Contractor Line 12′ × 6′ horizontal double-swing gate with interlocking T&G infill.
What is the gate made from?
The gate uses 6063-T6 USA-made aluminum with architectural powder coating and AAMA-2604 Cardinal Paint / TIGER finish specifications, along with excellent corrosion resistance and non-combustible aluminum construction.
Will the aluminum rust over time?
Aluminum does not form the red iron-oxide rust associated with steel and iron. Routine cleaning and hardware inspection are still recommended, especially in coastal environments.
Can I customize the gate size or finish?
Yes. Custom colors and custom sizes are available. Confirm the finished opening and requested finish with Aluglobus before ordering a non-standard configuration.
Does the kit include a locking mechanism?
The gate package includes a basic cane bolt. A separate latch, lock or access-control system can be planned based on the project requirements.
Does the kit include the parts shown in the hardware section?
The gate package includes the heavy-duty frame, inner corner brackets, channel kit, ALU50 T&G panels, heavy-duty support hardware, cane bolt and multiple fastener sizes. Post and finish selections should be confirmed for the specific order before checkout.
Send the opening dimensions and project photos before the frame is cut.