Full-frame strengthHeavy-duty gate frameAluglobus fence
ALU 50-60 T&G Woodgrain 4x6 ft. Heavy-Duty Pedestrian Gate Kit - Single Swing - NO GAP
ALU 50-60 T&G Woodgrain 4x6 ft. Heavy-Duty Pedestrian Gate Kit - Single Swing - NO GAP
Regular price
$1,456.93 USD
Regular price
Sale price
$1,456.93 USD
Unit price
per
Couldn't load pickup availability
Shipping & Returns
Shipping & Returns
Care Instructions
Care Instructions
Description
The ALU 50-60 T&G Woodgrain 4×6 ft Heavy-Duty Pedestrian Gate Kit is a single-swing, no-gap aluminum gate built around a 4-inch heavy-duty frame and tongue-and-groove privacy infill. It combines a warm wood appearance with 6063-T6 aluminum, corrosion resistance, contractor-grade hardware and a non-combustible metal substrate. The system is built around the parts that matter most to long-term gate performance: 6063-T6 aluminum, a 4-inch heavy-duty perimeter frame, interlocking tongue-and-groove privacy infill, heavy-duty hinge support and an architectural exterior finish. Review the woodgrain T&G infill, heavy-duty frame, hinge support, coating quality and installed gate details from multiple angles. A contractor-line pedestrian gate designed around a full perimeter frame, no-gap T&G privacy infill and heavy-duty hinge support. Heavy-duty USA aluminum frame stock forms the structural perimeter of the single-swing gate. Internal corner hardware supports square frame assembly and clean exterior lines. Channel components capture and organize the privacy infill within the framed gate system. Six-foot teak/woodgrain tongue-and-groove aluminum infill creates the no-gap privacy field. Heavy-duty hinge hardware supports the pedestrian leaf and provides the pivot point for single-swing operation. The listed hardware includes a 2.5″ aluminum cap, 6′ L-shape gate stopper, #12×2″ black screws, #10×3/4″ screws and #10×1″ screws. Tongue-and-groove aluminum uses mating profile edges to create a continuous infill field. For this SKU, there is no intentionally designed spacing between the privacy boards, giving the pedestrian gate a more solid architectural face than an open-slat gate. This product uses a dedicated 4-inch heavy-duty aluminum gate frame, internal corner hardware, channel components and a heavy-duty hinge system. That frame-first approach is what separates a purpose-built pedestrian gate from a loose infill assembly. Create a more private transition between front and rear property areas. Use the 4×6 single-swing configuration where a dedicated framed walk gate is required. Repeat the same framed T&G architecture across multiple homes or controlled-access points. Coordinate the woodgrain gate with fences, patios, landscape materials and contemporary exterior finishes. Aluminum’s corrosion resistance makes it a practical alternative to untreated ferrous or wood gate materials. Use the contractor-line system where repeatability, clean alignment and low recurring maintenance matter. Use these views to examine the finished woodgrain surface, privacy field, frame proportions and overall installed appearance. For a clean result, keep the frame square, seat the T&G profiles correctly in the channel system, align the hinge hardware and verify the finished swing before placing the gate into service. Confirm the finished width and height, support surfaces, hinge side, latch side and required clearances before assembly. Use the supplied frame and internal corner hardware, keeping the gate square before the infill is fully secured. Insert the ALU50 T&G privacy profiles into the channel system so mating edges interlock with no designed open gap. Install and align the heavy-duty 5-inch 2-way support hinge according to the selected post or structural support condition. Position the L-shape stopper and coordinate the latch, lock or access-control hardware with the finished swing path. Check squareness, swing, closure, fastener tightness and finish condition before placing the gate into service. Measure the clear opening and determine whether the listed 4×6 configuration fits the completed site condition. Choose the appropriate 2″, 2.75″ or 2″×3″ post/support condition based on the project design and mounting substrate. Verify hinge side and swing path so the gate clears walls, landscaping, steps and adjacent circulation. Plan the selected latch, key lock or access hardware before finalizing frame and post positions. This SKU is a no-gap T&G privacy gate. Select an open-slat model if airflow or intentional spacing is required. Pool, egress, fire-zone and access-control projects can have additional requirements beyond the gate material itself. Watch the Heavy-Duty gate system and Aluglobus construction approach in motion. Send the opening dimensions, photos and preferred swing direction before ordering. Aluglobus Aluminum Systems can help coordinate the correct frame, T&G infill, post and hardware package for the project. The questions below focus on the heavy-duty frame, no-gap T&G privacy, finish, fire behavior and installation planning. Factory-direct aluminum gates and fence systems for contractors, builders, designers, homeowners and serious DIY projects. Nationwide material supply and product support are available.Full privacy. Heavy-duty frame. Woodgrain aluminum.
Gate size4 ft × 6 ft
ConfigurationHeavy-duty · single swing
PrivacyT&G · no designed gap
FinishWoodgrain aluminum
What is actually behind the woodgrain finish.
See the frame, finish, hinge support and assembly details.
Full-frame strengthHeavy-duty gate frame
T&G system compatibilityPrivacy infill detail
Long-lasting finishAAMA 2604 reference
Reinforced hinge supportHeavy-duty hardware
Premium aluminum construction6063-T6 platform
Contractor-ready assemblyField installationALU 50-60 T&G Woodgrain Heavy-Duty 4×6 at a glance.
The gate-kit components, organized by function.
20′ 4″ HD gate frame
Inner corner brackets
Channel kit
6.3″ ALU50 T&G profile
5″ 2-way support hinge
Stopper, cap and fasteners
Privacy comes from the profile geometry, not loose boards pushed together.
A gate should be a framed system, not fence material with hinges attached.
A full-privacy pedestrian gate for residential and light-commercial access points.
Side-yard entrances
Pedestrian walkways
Gated communities
Outdoor living areas
Coastal and humid regions
Light-commercial projects
A closer look at the finished gate system.
Gate system detailFrame + infill
Project detailInstalled viewSix checkpoints from opening verification to final adjustment.
Verify the opening
Assemble the HD frame
Install T&G infill
Mount hinge hardware
Install stopper and access hardware
Final alignment
The gate kit is only one part of a correct opening.
Confirm finished dimensions
Select the support system
Choose swing direction
Coordinate latch or lock
Confirm privacy intent
Verify local requirements
See Aluglobus gate construction in motion.
Full privacy without building the gate from wood.
Technical answers before you order the ALU 50-60 T&G gate.
What makes this different from a Universal DIY gate?
This SKU is the Heavy-Duty Contractor Line version. It uses a 4-inch HD USA aluminum gate frame and a heavy-duty 5-inch 2-way support hinge, giving the pedestrian leaf a dedicated heavy-duty frame and hardware package.What does “T&G NO GAP” mean?
T&G means tongue and groove. The mating edges of the aluminum privacy profiles interlock, so the design does not use the intentional 3/8-inch or 1/2-inch open spacing found on slat-style gate models.What aluminum alloy is used?
The gate system specifies 6063-T6 USA-made aluminum with an architectural exterior coating system.Is the gate non-combustible?
The aluminum substrate is identified as non-combustible, with no sustained ignition under normal fire exposure, smoke developed of 0 and an approximate melting range of 615–655°C. Complete project compliance still depends on the full assembly and local requirements.What finish is used on the woodgrain gate?
The product information references an architectural powder-coating process, AAMA 2604 finish materials and Cardinal Paint / TIGER. The visible surface is a woodgrain architectural finish over the aluminum gate system.Which posts can be used with the gate?
Available post options include 2-inch, 2.75-inch and 2-inch by 3-inch configurations. Final post selection should match the opening, substrate, hinge arrangement and project requirements.Can this gate be used with access-control hardware?
Latch, key-lock and low-voltage access-control configurations can be coordinated with the gate. Confirm hardware dimensions, clearances and loading requirements before ordering or drilling the frame.Send the opening dimensions and project photos. Build the gate package around the actual site.