Contractor-ready assembly
Pre-engineered components help reduce field fabrication, improve repeatability and keep the installation process organized.
Aluglobus fence
ALU 40 Black 8x8 ft. Heavy-Duty Pedestrian Gate Kit - Double Swing - GAP 3/8" or 1/2"
ALU 40 Black 8x8 ft. Heavy-Duty Pedestrian Gate Kit - Double Swing - GAP 3/8" or 1/2"
Regular price
$2,431.14 USD
Regular price
Sale price
$2,431.14 USD
Unit price
per
Couldn't load pickup availability
Shipping & Returns
Shipping & Returns
Care Instructions
Care Instructions
Description
The ALU40 Contractor Line 8' × 8' aluminum gate kit is a professional-grade swing gate system built around 6063-T6 architectural aluminum, reinforced frame construction and an exterior powder-coated finish. It is designed for projects that need a larger gate leaf without giving up the clean horizontal ALU40 look. The Contractor Line is intended for installers and project teams that want the efficiency of a pre-engineered system with the durability of a substantial aluminum gate. The frame uses precision-cut components and reinforced internal connections to help control alignment and reduce stress around the hinge side of the gate. The horizontal ALU40 profile gives the gate a modern architectural rhythm while aluminum keeps the assembly resistant to iron-oxide rust, wood rot and moisture swelling. The result is a gate designed to coordinate with contemporary fence systems, custom posts and project-specific hardware. At 8' × 8', site planning matters. Hinge support, post rigidity, swing clearance, wind exposure, latch alignment and the mounting substrate should all be confirmed before installation. The Contractor Line centers on repeatable assembly, heavy-duty aluminum construction, architectural appearance, low maintenance, exterior finish durability and compatibility with other Aluglobus systems. 6063-T6 aluminum with reinforced corners supports a stronger gate structure while avoiding the corrosion behavior of unprotected steel. Horizontal profiles create a clean, modern appearance designed to coordinate with contemporary fence and gate projects. AAMA 2604 powder coating is used for color retention and exterior surface protection in sun, humidity and coastal exposure. Aluminum does not rot like wood or develop iron-oxide rust. Routine washing and hardware inspection are still recommended. The gate is designed around ALU40 construction and can be coordinated with Aluglobus posts, accessories and adjacent aluminum systems. Explore the frame, slats, finish and installation details. Click any image for the full lightbox view. The gate is more than the horizontal slats. Frame geometry, hinge-side support, hardware alignment and finish quality determine how a large swing gate performs after installation. The system uses 6063-T6 aluminum, reinforced internal bracing, AAMA 2604 powder coating and contractor-oriented assembly. Final hardware and accessory selections should match the actual opening and site. Contractor value comes from consistency. Square frame assembly, controlled slat spacing, correct hinge alignment and a properly supported opening help reduce callbacks and keep the finished gate operating the way it should. These additional views show the ALU40 gate system, frame connections and architectural aluminum construction. Use the technical reference together with verified field dimensions. Post conditions, hinge offsets, latch clearance and finished grade should be confirmed before drilling or cutting. For an 8×8 gate, use the sequence as a framework and give extra attention to handling, post rigidity, squareness and hinge support. Organize the aluminum profiles, hardware and tools in a clean work area so finished components stay protected and easy to identify. Connect the frame with the specified stainless fasteners and verify that all corners are square before tightening the assembly. Cut and insert the ALU40 slats into the frame grooves, set the intended spacing and secure the profiles with the specified fasteners. Attach the heavy-duty hinges to the gate and properly supported side condition, then align them for smooth, controlled swing movement. Install or finish the side post condition and covers so the gate has the required structural support and a clean architectural appearance. Install caps, tighten connections, confirm clearances and test the complete swing and latch function before placing the gate into service. Choose a video below for a closer look at the ALU40 system and the Aluglobus gate-building approach. ALU40 uses architectural aluminum to balance rigidity and manageable weight. The Contractor Line emphasizes internal bracing and precision-cut corners to support alignment and reduce concentrated stress around hinge connections. The powder-coated finish is specified to AAMA 2604. Multiple finish options can be coordinated for projects that need the gate to match fencing, architecture or other aluminum systems. A large gate should still be treated as a moving assembly. Hinge condition, post anchorage, latch location, wind pressure, daily cycle count and final adjustment can have as much effect on performance as the aluminum profiles themselves. These answers address the most important planning questions for the 8×8 Contractor Line configuration. Aluglobus Aluminum Systems supplies contractors, builders, architects, designers, developers, installers, homeowners and serious DIY customers with factory-direct aluminum systems.Built for contractors who need strength, repeatability and a clean architectural finish.
Gate size8' × 8'
SystemALU40 Contractor Line
Material6063-T6 aluminum
FinishAAMA 2604 powder coating
A larger ALU40 gate engineered around contractor-grade construction.
Professional installation speed without treating the gate like a lightweight panel.
Reinforced aluminum frame
Architectural ALU40 lines
Exterior powder coating
Low-maintenance substrate
System compatibility
Contractor Line construction from multiple angles.
Full-frame strengthALU40
Slat compatibilitySystem detail
Powder-coated finishExterior finish
Reinforced hinge supportFrame detail
Premium aluminum constructionContractor Line
Organized field assemblyInstallationA closer look at the aluminum system, frame and finish.
Plan the 8×8 opening around the complete gate assembly.
Important: The kit is configured around a precision-cut frame, corner connectors, hinges, latch hardware and setup instructions. Confirm the exact current included hardware, finish, swing direction and accessory package when ordering because configurations can change.
Product
ALU40 Contractor Line gate kit
Nominal size
8' × 8'
Gate type
Swing gate / pedestrian gate system
Primary material
6063-T6 architectural aluminum
Infill profile
ALU40 horizontal aluminum profile
Frame construction
Precision-cut aluminum frame with reinforced internal corner support
Finish
Exterior architectural powder coating
Coating standard
AAMA 2604
Finish options
Black plus additional project-specific finishes
Hardware planning
Hinges, latch/lock configuration and posts must match the finished gate, opening and mounting condition
Use case
Contractor, builder, residential and light-commercial projects
Precision components make the field work cleaner.
More ALU40 Contractor Line project and component views.
Gate project viewALU40
Horizontal gate detailALU40
Frame connectionContractor Line
Architectural constructionAluminum system
Component detailALU40 gate
System project detailContractor Line
Technical referenceUse the drawing as a system reference, then verify the actual 8×8 opening.
Six steps carried forward from the product instructions.
Preparation
Frame assembly
Slat installation
Hinge installation
Posts and covers
Final adjustment
See the Aluglobus gate system and manufacturing approach.
The frame, finish and hardware all matter more as the gate gets larger.
Answers before you order.
What makes the ALU40 Contractor Line 8×8 gate different from a lightweight aluminum gate?
The Contractor Line is built around a substantial ALU40 aluminum profile system, reinforced internal frame connections and factory-precision components. Its purpose is long-term structural performance, repeatable assembly and professional project integration rather than the lightest possible retail gate.Can this gate be installed by a homeowner?
The system is pre-engineered and can be approachable for an experienced DIY installer, but an 8×8 gate is physically large. Accurate layout, safe handling, rigid mounting posts, proper anchorage and careful hinge alignment are important. Professional installation is appropriate when the opening, grade or support conditions are not straightforward.Is the aluminum frame powder coated?
Yes. The gate uses an AAMA 2604 powder-coated finish intended to protect the aluminum surface and provide durable color retention under exterior exposure.Can the color or infill be customized?
Multiple finish options and project-specific infill coordination are available. Confirm the exact available color, texture, ALU40 layout, lead time and any custom requirements before production.Does the gate come with hinges and latch hardware?
The kit is configured with hinges and latch hardware, with additional lock and hardware options available. Confirm the exact hardware package included with the current 8×8 SKU when ordering so it matches the post condition and intended use.What should be checked before installing an 8×8 swing gate?
Verify the finished opening, post size and anchorage, hinge-side structure, swing direction, clear swing path, grade, drainage, latch receiving point and wind exposure. A larger gate leaf creates higher leverage on hinges and supports than a smaller pedestrian gate.Will aluminum rust?
Aluminum does not form iron-oxide rust like steel. Exterior hardware and fasteners still need appropriate material selection and routine inspection, and coastal installations benefit from periodic washing to remove salt deposits.Is aluminum suitable for non-combustible exterior strategies?
Aluminum is a non-combustible metal substrate and does not provide fuel to a fire. Final Zone Zero or code compliance depends on the complete installation, adjacent materials, attachments, clearances and local requirements, not the aluminum gate alone.Send the opening, hinge side, swing direction, photos and project location.