{"product_id":"aluminum-gate-kit-alu40-slat-contractor-line-12-x-6-double-swing-black","title":"ALU 40 Black 12x6 ft. Heavy-Duty Pedestrian Gate Kit - Double Swing - GAP 3\/8\" or 1\/2\"","description":"\u003csection\u003e\n        ALU40 · Contractor Line · Heavy-duty double swing · Black\n        \u003ch2\u003eA 12′ × 6′ black ALU40 double-swing gate built around a 4″ heavy-duty contractor frame.\u003c\/h2\u003e\n        \u003cp\u003eThe ALU40 Contractor Line 12′ × 6′ Double Swing Black gate kit is a heavy-duty aluminum system for wide residential, estate, driveway and light-commercial openings. It combines a 4-inch HD USA aluminum gate frame, 4-inch ALU40 horizontal slats, inner corner reinforcement, a channel kit, a 6-foot L-shape stopper, 5-inch two-way support hinge hardware, a basic cane bolt and listed assembly fasteners in a two-leaf swing configuration.\u003c\/p\u003e\n          \u003ca href=\"#alu40hd126-specs\"\u003eView specifications ↓\u003c\/a\u003e\n          \u003ca href=\"#alu40hd126-gallery\"\u003eView product media ↓\u003c\/a\u003e\n        \u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/120ff94a-2847-4160-9dc6-3b76751269e6-scaled.jpg\" alt=\"ALU40 Contractor Line 12 by 6 horizontal aluminum double swing gate system\" loading=\"eager\" decoding=\"async\"\u003e\n      Overall size\u003cstrong\u003e12′ wide × 6′ high\u003c\/strong\u003e\n      Configuration\u003cstrong\u003eDouble swing · two leaves\u003c\/strong\u003e\n      Frame\u003cstrong\u003e4″ HD aluminum\u003c\/strong\u003e\n      Slat profile\u003cstrong\u003eALU40 · 4″ × 3\/4″ × 6′\u003c\/strong\u003e\n  \u003c\/section\u003e\n  \u003csection id=\"alu40hd126-gallery\"\u003e\n          The ALU40 Contractor Line 12′ × 6′ system\n          \u003ch2\u003eHeavy-duty 4″ framing, 4″ ALU40 horizontal infill and contractor-focused double-swing hardware.\u003c\/h2\u003e\n        \u003cp\u003eExplore the actual black ALU40 Contractor Line media from the current product page, including the heavy-duty frame, horizontal slat layout, finish and gate-system details. Open any image for a larger look without leaving the product page.\u003c\/p\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/120ff94a-2847-4160-9dc6-3b76751269e6-scaled.jpg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/120ff94a-2847-4160-9dc6-3b76751269e6-scaled.jpg\" alt=\"ALU40 Contractor Line 12 by 6 black double swing gate frame system\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eFull-frame strength\u003c\/strong\u003e4″ HD contractor frame\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/WhatsApp-Image-2025-12-29-at-22.41.14-1.jpeg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/WhatsApp-Image-2025-12-29-at-22.41.14-1.jpeg\" alt=\"ALU40 4 inch horizontal slat black double swing gate system\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eALU40 horizontal slats\u003c\/strong\u003e4″ × 3\/4″ profile\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/Wp5dyQTE-scaled.jpeg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/Wp5dyQTE-scaled.jpeg\" alt=\"Black architectural powder-coated ALU40 aluminum gate finish\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eArchitectural powder coat\u003c\/strong\u003eAAMA 2604 finish\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/c449009d-f2a6-4b12-8f1d-e90ba710f27e-1.jpg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/c449009d-f2a6-4b12-8f1d-e90ba710f27e-1.jpg\" alt=\"Heavy-duty gate hinge support reference\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eReinforced hinge support\u003c\/strong\u003e5″ two-way hardware\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/d98e4d31-e187-4a54-84a1-83d32e8427d7.jpg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/d98e4d31-e187-4a54-84a1-83d32e8427d7.jpg\" alt=\"6063-T6 aluminum gate construction\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eAluminum construction\u003c\/strong\u003e6063-T6 system\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/WhatsApp-Image-2025-12-29-at-22.41.14.jpeg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/WhatsApp-Image-2025-12-29-at-22.41.14.jpeg\" alt=\"ALU40 Contractor Line gate assembly reference\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eContractor-ready system\u003c\/strong\u003eHeavy-Duty gate kit\n        \u003c\/article\u003e\n  \u003c\/section\u003e\n  \u003csection aria-label=\"ALU40 Contractor Line 12 by 6 black double swing gate video\"\u003e\n    \u003cvideo autoplay muted loop playsinline preload=\"metadata\" src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2026\/01\/YOUTUBE-ALU-1.mp4\"\u003e\u003c\/video\u003e\n      Built for contractor-grade gate work\n      \u003ch2\u003eA wide double-swing opening needs more than attractive slats. The frame, hinges, posts and alignment all have to work as one system.\u003c\/h2\u003e\n      \u003cp\u003eThe heavy-duty Contractor Line is organized around a 4-inch HD aluminum gate frame, inner corner reinforcement, channel components, ALU40 infill, a center closing condition and two-way hinge support for professional installation.\u003c\/p\u003e\n        \u003cstrong\u003e4″ HD gate frame\u003c\/strong\u003eThe contractor frame is designed for the structural demands of a wide two-leaf swing gate.\n        \u003cstrong\u003eALU40 horizontal infill\u003c\/strong\u003eThe 4″ × 3\/4″ × 6′ aluminum profile creates the wider horizontal rhythm associated with the ALU40 system, with a 3\/8″ or 1\/2″ gap on this listing.\n        \u003cstrong\u003eManual or automation planning\u003c\/strong\u003eSwing-gate automation can be planned when the selected operator, 3″ HD support posts, footing, safety devices, attachment points and site geometry are appropriate.\n  \u003c\/section\u003e\n  \u003csection id=\"alu40hd126-specs\"\u003e\n        Product specifications\n        \u003ch2\u003eThe ALU40 Contractor Line 12′ × 6′ Double Swing Black gate at a glance.\u003c\/h2\u003e\n        \u003cp\u003eThis black 12′ × 6′ configuration uses two swing leaves, a 4-inch heavy-duty USA aluminum frame and ALU40 4″ × 3\/4″ × 6′ horizontal slats with a 3\/8″ or 1\/2″ gap option.\u003c\/p\u003e\n        \u003cstrong\u003eInstallation planning:\u003c\/strong\u003e Confirm opening dimensions, swing clearance, post selection, footing conditions and any automation requirements before ordering or assembly. Post selection should reflect the actual site and gate operator requirements.\n      \u003cdl\u003e\n        \u003cdt\u003eProduct\u003c\/dt\u003e\n\u003cdd\u003eALU40 Black 12′ × 6′ Heavy-Duty Contractor Line Double Swing Gate Kit\u003c\/dd\u003e\n        \u003cdt\u003eLine\u003c\/dt\u003e\n\u003cdd\u003eContractor Line · Heavy-Duty double swing\u003c\/dd\u003e\n        \u003cdt\u003eOverall size\u003c\/dt\u003e\n\u003cdd\u003e12′ wide × 6′ high\u003c\/dd\u003e\n        \u003cdt\u003eLeaf layout\u003c\/dt\u003e\n\u003cdd\u003eDouble swing · two approximately 6′ leaves\u003c\/dd\u003e\n        \u003cdt\u003eFrame\u003c\/dt\u003e\n\u003cdd\u003e4″ heavy-duty USA aluminum gate frame\u003c\/dd\u003e\n        \u003cdt\u003eFrame stock listed\u003c\/dt\u003e\n\u003cdd\u003e24′ gate frame\u003c\/dd\u003e\n        \u003cdt\u003eMaterial\u003c\/dt\u003e\n\u003cdd\u003eUSA-made 6063-T6 aluminum\u003c\/dd\u003e\n        \u003cdt\u003eCharacteristics\u003c\/dt\u003e\n\u003cdd\u003eLightweight · excellent corrosion resistance\u003c\/dd\u003e\n        \u003cdt\u003eSlat profile\u003c\/dt\u003e\n\u003cdd\u003eALU40 · 4″ × 3\/4″ × 6′ horizontal aluminum slat\u003c\/dd\u003e\n        \u003cdt\u003eCorner reinforcement\u003c\/dt\u003e\n\u003cdd\u003eInner corner bracket system\u003c\/dd\u003e\n        \u003cdt\u003eSlat support\u003c\/dt\u003e\n\u003cdd\u003eChannel kit\u003c\/dd\u003e\n        \u003cdt\u003eGate stopper\u003c\/dt\u003e\n\u003cdd\u003e6′ L-shape gate stopper\u003c\/dd\u003e\n        \u003cdt\u003eHinge system\u003c\/dt\u003e\n\u003cdd\u003eHeavy-duty 5″ two-way support hinge\u003c\/dd\u003e\n        \u003cdt\u003eFasteners listed\u003c\/dt\u003e\n\u003cdd\u003e#10 × 1″ · #12 × 2″ black · #10 × 3\/4″ screws\u003c\/dd\u003e\n\u003cdt\u003eCenter hardware listed\u003c\/dt\u003e\n\u003cdd\u003eBasic cane bolt\u003c\/dd\u003e\n\u003cdt\u003eCap listed\u003c\/dt\u003e\n\u003cdd\u003e2″ aluminum cap\u003c\/dd\u003e\n        \u003cdt\u003eSlat gap\u003c\/dt\u003e\n\u003cdd\u003e3\/8″ or 1\/2″\u003c\/dd\u003e\n\u003cdt\u003eStandard color\u003c\/dt\u003e\n\u003cdd\u003eBlack\u003c\/dd\u003e\n\u003cdt\u003eOptional support posts\u003c\/dt\u003e\n\u003cdd\u003e3″ × 3″ HD posts in 8′ and 12′ listing options\u003c\/dd\u003e\n        \u003cdt\u003eFinish\u003c\/dt\u003e\n\u003cdd\u003eArchitectural powder coating\u003c\/dd\u003e\n        \u003cdt\u003eCoating standard\u003c\/dt\u003e\n\u003cdd\u003eAAMA 2604\u003c\/dd\u003e\n                \u003cdt\u003eCustomization\u003c\/dt\u003e\n\u003cdd\u003eCustom colors and custom sizes available\u003c\/dd\u003e\n        \u003cdt\u003eCombustibility\u003c\/dt\u003e\n\u003cdd\u003eNon-combustible aluminum substrate\u003c\/dd\u003e\n        \u003cdt\u003eAutomation\u003c\/dt\u003e\n\u003cdd\u003eCan be configured for compatible swing-gate automation\u003c\/dd\u003e\n        \u003cdt\u003eInstaller profile\u003c\/dt\u003e\n\u003cdd\u003eProfessional contractor or experienced installer\u003c\/dd\u003e\n      \u003c\/dl\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n      What’s included and specified\n      \u003ch2\u003eThe structural pieces that make this a Contractor Line gate kit.\u003c\/h2\u003e\n      \u003cp\u003eThe live product listing identifies the 24′ 4″ HD USA aluminum gate-frame stock, inner corner bracket, channel kit, 6′ L-shape gate stopper, heavy-duty 5″ two-way support hinge, basic cane bolt, listed screws, 2″ aluminum cap and black 6′ ALU40 slat profile used for the double-swing assembly.\u003c\/p\u003e\n        \u003carticle\u003e01\u003ch3\u003e4″ HD gate frame\u003c\/h3\u003e\n\u003cp\u003eThe listing specifies 24′ of 4-inch heavy-duty USA aluminum gate-frame material for the Contractor Line assembly.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e02\u003ch3\u003eInner corner brackets\u003c\/h3\u003e\n\u003cp\u003eCorner reinforcement helps maintain a square, rigid frame as the two gate leaves are assembled.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e03\u003ch3\u003eChannel kit\u003c\/h3\u003e\n\u003cp\u003eThe channel system supports the horizontal ALU40 infill and creates a controlled, finished relationship between slats and frame.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e04\u003ch3\u003e6′ L-shape gate stopper\u003c\/h3\u003e\n\u003cp\u003eThe listed L-shape stopper is part of the closing and alignment hardware for the double-swing system.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e05\u003ch3\u003e5″ two-way support hinge\u003c\/h3\u003e\n\u003cp\u003eThe heavy-duty hinge system is selected for contractor-grade swing support and proper leaf alignment.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e06\u003ch3\u003eFastener set\u003c\/h3\u003e\n\u003cp\u003eThe product listing identifies #10 × 1″, #12 × 2″ black and #10 × 3\/4″ screws for the gate assembly.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e07\u003ch3\u003eALU40 horizontal slats\u003c\/h3\u003e\n\u003cp\u003eThe listed black infill is the ALU40 6′ profile. The matching ALU40 product specification identifies a 4″ × 3\/4″ × 6′ profile, and this gate is offered with a 3\/8″ or 1\/2″ gap.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e08\u003ch3\u003e3″ HD post options\u003c\/h3\u003e\n\u003cp\u003eOptional additions on the live product listing include 3″ × 3″ HD support posts in 8′ and 12′ options, plus matching 3″ aluminum caps. Final support selection depends on the site, footing, exposure and operator plan.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e09\u003ch3\u003eBasic cane bolt\u003c\/h3\u003e\n\u003cp\u003eA basic cane bolt is listed with the gate kit for the double-swing closing and hold-open \/ hold-closed condition as appropriate to the installation.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e10\u003ch3\u003e2″ aluminum cap\u003c\/h3\u003e\n\u003cp\u003eA 2-inch aluminum cap is included in the current gate-kit parts list.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e11\u003ch3\u003eCustom project options\u003c\/h3\u003e\n\u003cp\u003eCustom gate colors, sizes and slat spacing are available for project-specific orders, with optional HD posts and caps selected separately.\u003c\/p\u003e\u003c\/article\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n        \u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/c449009d-f2a6-4b12-8f1d-e90ba710f27e-1.jpg\" alt=\"ALU40 Contractor Line heavy-duty double swing gate hinge and frame reference\" loading=\"lazy\" decoding=\"async\"\u003e\n        Why this 12′ × 6′ configuration\n        \u003ch2\u003eA wide opening divided into two controlled swing leaves instead of one oversized panel.\u003c\/h2\u003e\n        \u003cp\u003eThe 12-foot overall gate is configured as a double swing, creating two leaves that meet at the center. This format is suited to driveways and broad access points where there is enough clear swing area on the property. The 6-foot height provides substantial coverage, while the 4-inch HD frame is intended to maintain structural stability across frequent use and the wider 4-inch ALU40 profile gives the opening a stronger horizontal architectural rhythm.\u003c\/p\u003e\n          12′ × 6′ overall format\n          Two-leaf double swing\n          4″ heavy-duty frame\n          ALU40 4″ horizontal slats\n          3\/8″ or 1\/2″ gap\n          Black standard finish\n          6063-T6 aluminum\n          AAMA 2604 finish\n          Contractor Line · Heavy-Duty\n          Automation planning available\n  \u003c\/section\u003e\n  \u003csection\u003e\n          More product views\n          \u003ch2\u003eAdditional views of the black ALU40 Contractor Line gate system.\u003c\/h2\u003e\n        \u003cp\u003eUse the additional views to inspect the aluminum system, horizontal slat language and exterior finish in more detail.\u003c\/p\u003e\n        \u003carticle\u003e\u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/44aa54b3-e666-4efc-b249-33e2020615f4-scaled.jpg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/44aa54b3-e666-4efc-b249-33e2020615f4-scaled.jpg\" alt=\"ALU40 Contractor Line gate system view 01\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\u003cstrong\u003eGate system view 01\u003c\/strong\u003eBlack ALU40 gate system\u003c\/article\u003e\n        \u003carticle\u003e\u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/fb616b25-1c62-4535-a781-18e8822a4642-scaled.jpg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/fb616b25-1c62-4535-a781-18e8822a4642-scaled.jpg\" alt=\"ALU40 Contractor Line gate system view 02\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\u003cstrong\u003eGate system view 02\u003c\/strong\u003eBlack ALU40 gate system\u003c\/article\u003e\n        \u003carticle\u003e\u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/c449009d-f2a6-4b12-8f1d-e90ba710f27e.jpg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/c449009d-f2a6-4b12-8f1d-e90ba710f27e.jpg\" alt=\"ALU40 Contractor Line gate system view 03\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\u003cstrong\u003eGate system view 03\u003c\/strong\u003eBlack ALU40 gate system\u003c\/article\u003e\n        \u003carticle\u003e\u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/O4Owj9AU-1-scaled.jpeg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/O4Owj9AU-1-scaled.jpeg\" alt=\"ALU40 Contractor Line gate system view 04\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\u003cstrong\u003eGate system view 04\u003c\/strong\u003eBlack ALU40 gate system\u003c\/article\u003e\n        \u003carticle\u003e\u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/b70bbf58-fe8e-4069-ad0d-d90dcb364985-scaled.jpg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/b70bbf58-fe8e-4069-ad0d-d90dcb364985-scaled.jpg\" alt=\"ALU40 Contractor Line gate system view 05\" loading=\"lazy\" decoding=\"async\"\u003e\u003c\/a\u003e\u003cstrong\u003eGate system view 05\u003c\/strong\u003eBlack ALU40 gate system\u003c\/article\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n      Technical profile reference\n      \u003ch2\u003eALU40 profile geometry and the 4″ contractor-frame relationship.\u003c\/h2\u003e\n      \u003cp\u003eUse the ALU40 profile reference to understand the 4-inch horizontal infill, then compare it with actual black Contractor Line product media. Final gate dimensions, post conditions, center meeting condition and hardware placement should be confirmed for the actual project.\u003c\/p\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2026\/01\/Alu-40-2D-and-3D.png\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2026\/01\/Alu-40-2D-and-3D.png\" alt=\"ALU40 2D and 3D aluminum slat profile drawing\" loading=\"lazy\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eALU40 profile\u003c\/strong\u003e2D and 3D technical view\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/WhatsApp-Image-2025-12-29-at-22.41.14-1.jpeg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/WhatsApp-Image-2025-12-29-at-22.41.14-1.jpeg\" alt=\"ALU40 exploded aluminum profile render\" loading=\"lazy\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eALU40 gate system\u003c\/strong\u003eBlack Contractor Line media\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/WhatsApp-Image-2025-12-29-at-22.41.14-1.jpeg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2025\/12\/WhatsApp-Image-2025-12-29-at-22.41.14-1.jpeg\" alt=\"ALU40 Contractor Line frame and slat reference\" loading=\"lazy\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eContractor gate reference\u003c\/strong\u003eContractor gate reference\n        \u003c\/article\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n      Contractor Line hardware and planning\n      \u003ch2\u003eFrame strength is only part of the gate. Post, footing, hinge and operator choices control how the system performs after installation.\u003c\/h2\u003e\n      \u003cp\u003eThe product is designed as a heavy-duty Contractor Line kit, but the site still determines the correct support condition. Contractors should treat the post and footing selection as part of the gate system rather than an afterthought.\u003c\/p\u003e\n        \u003carticle\u003e\u003ch3\u003e4″ HD frame\u003c\/h3\u003e\n\u003cp\u003eThis Contractor Line configuration uses a 4-inch heavy-duty gate-frame platform for the 12-foot double-swing opening.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003e5″ two-way hinge support\u003c\/h3\u003e\n\u003cp\u003eHeavy-duty two-way hinge hardware is listed for the gate. Alignment and structural attachment remain critical across both leaves.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003ePost selection\u003c\/h3\u003e\n\u003cp\u003eThe live listing offers 3″ × 3″ HD post options in 8′ and 12′ lengths, with black and custom-color choices. Selection should match the actual opening, load, exposure, footing and operator plan.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003eConcrete and footing conditions\u003c\/h3\u003e\n\u003cp\u003ePosts must be installed plumb and securely supported. Footing design and embedment depend on project conditions and applicable requirements.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003eAutomation planning\u003c\/h3\u003e\n\u003cp\u003eThe gate can be planned for compatible swing automation, but operator capacity, attachment location, safety devices and site geometry must be confirmed as a complete system.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003eCenter closing condition\u003c\/h3\u003e\n\u003cp\u003eBoth leaves must align correctly at the center, with the stopper, latch or access-control hardware planned before final adjustment.\u003c\/p\u003e\u003c\/article\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n          Additional project elements\n          \u003ch2\u003eAccess-control and installation components shown on the current product page.\u003c\/h2\u003e\n        \u003cp\u003eThese items are shown as additional elements on the current page. Treat them as project options rather than assuming they are included with the base gate kit, and confirm compatibility before ordering.\u003c\/p\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/614vexgZs3L._AC_SL1500_.jpg\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/614vexgZs3L._AC_SL1500_.jpg\" alt=\"Optional keypad and access control reference\" loading=\"lazy\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eKeypad\u003c\/strong\u003eAdditional element\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA-%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0-2024-03-22-%D0%B2-20.47.12.png\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA-%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0-2024-03-22-%D0%B2-20.47.12.png\" alt=\"Optional gate latch reference\" loading=\"lazy\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eLatch\u003c\/strong\u003eAdditional element\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA-%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0-2024-03-22-%D0%B2-20.47.21.png\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA-%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0-2024-03-22-%D0%B2-20.47.21.png\" alt=\"Optional bar handle reference\" loading=\"lazy\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eBar handle\u003c\/strong\u003eAdditional element\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA-%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0-2024-03-22-%D0%B2-20.47.28.png\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA-%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0-2024-03-22-%D0%B2-20.47.28.png\" alt=\"Optional C-channel reference\" loading=\"lazy\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eC-channel\u003c\/strong\u003eAdditional element\n        \u003c\/article\u003e\n        \u003carticle\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA-%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0-2024-03-22-%D0%B2-20.47.36.png\"\u003e\u003cimg src=\"https:\/\/aluglobusfence.com\/wp-content\/uploads\/2024\/03\/%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA-%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0-2024-03-22-%D0%B2-20.47.36.png\" alt=\"Optional aluminum base plate reference\" loading=\"lazy\"\u003e\u003c\/a\u003e\n          \u003cstrong\u003eBase plate\u003c\/strong\u003eAdditional element\n        \u003c\/article\u003e\n  \u003c\/section\u003e\n\u003csection\u003e\n      Applications\n      \u003ch2\u003eA contractor-grade aluminum gate for driveways and wide access points where two swing leaves make sense.\u003c\/h2\u003e\n      \u003cp\u003eThe 12′ × 6′ format is intended for wide residential and light-commercial openings with enough clear area for the double-swing arc and suitable structural support.\u003c\/p\u003e\n        \u003carticle\u003e\u003ch3\u003eResidential driveways\u003c\/h3\u003e\n\u003cp\u003eCreate a modern two-leaf driveway entrance with wider 4-inch ALU40 horizontal lines and contractor-grade aluminum framing.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003eEstate entrances\u003c\/h3\u003e\n\u003cp\u003eThe broad 12-foot format works well where the entrance needs architectural presence as well as vehicle access.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003eGated communities and HOA projects\u003c\/h3\u003e\n\u003cp\u003eUse the repeatable aluminum system where consistent appearance and durable gate construction matter across multiple access points.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003eCommercial access\u003c\/h3\u003e\n\u003cp\u003eA practical option for office, mixed-use and light-commercial entries when the opening and use cycle suit a double-swing system.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003ePool and perimeter openings\u003c\/h3\u003e\n\u003cp\u003eThe horizontal aluminum system can be used at pool or perimeter access points when the complete installation, latch, clearance and local safety requirements are satisfied.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003eLight-industrial and mixed-use access\u003c\/h3\u003e\n\u003cp\u003eThe reinforced Contractor Line can serve appropriate light-industrial and mixed-use openings where the site conditions suit a double-swing gate.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003eMatching fence-and-gate packages\u003c\/h3\u003e\n\u003cp\u003eCoordinate the ALU40 horizontal language with compatible aluminum fence systems for a more continuous property design.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e\u003ch3\u003eCoastal and humid climates\u003c\/h3\u003e\n\u003cp\u003eAluminum avoids iron-oxide rust and is well suited to environments where steel corrosion maintenance can become a recurring issue.\u003c\/p\u003e\u003c\/article\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n      Durability, finish and non-combustible material\n      \u003ch2\u003e6063-T6 aluminum with an AAMA 2604 architectural finish for exterior gate applications.\u003c\/h2\u003e\n      \u003cp\u003eThe current product content identifies 6063-T6 aluminum and an architectural powder-coated exterior finish. The matching black ALU40 slat specification identifies AAMA 2604 super-durable powder coating. Aluminum does not develop iron-oxide rust like steel, and the metal substrate is non-combustible.\u003c\/p\u003e\n        \u003cstrong\u003e6063-T6 aluminum\u003c\/strong\u003e6063-T6 architectural aluminum provides the material platform identified by the current product content for the frame and ALU40 system.\n        \u003cstrong\u003eAAMA 2604 powder coat\u003c\/strong\u003eAn architectural exterior finish supports long-term color and surface protection with routine cleaning.\n        \u003cstrong\u003eNon-combustible substrate\u003c\/strong\u003eThe aluminum itself does not ignite or sustain flame under normal fire exposure. Final code compliance always depends on the complete project assembly and jurisdiction.\n  \u003c\/section\u003e\n  \u003csection\u003e\n      Installation sequence\n      \u003ch2\u003eA six-step contractor workflow from verified opening to synchronized double-swing operation.\u003c\/h2\u003e\n      \u003cp\u003eStart with the site and support conditions, then assemble the two heavy-duty leaves square, install the 4″ ALU40 infill and complete hinge, stop and access-control alignment before regular use.\u003c\/p\u003e\n        \u003carticle\u003e01\u003ch3\u003eVerify the finished opening\u003c\/h3\u003e\n\u003cp\u003eConfirm the 12-foot overall opening, 6-foot gate height, grade, swing path and center meeting condition before setting support hardware.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e02\u003ch3\u003eConfirm posts and footings\u003c\/h3\u003e\n\u003cp\u003eSelect the appropriate post configuration for the site, then install structural supports plumb, aligned and adequately founded for the gate and any operator loads.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e03\u003ch3\u003eAssemble the 4″ HD frames\u003c\/h3\u003e\n\u003cp\u003eLay out the heavy-duty frame sections, inner corner brackets and channel components on a protected flat surface and keep both leaves square during assembly.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e04\u003ch3\u003eInstall ALU40 4″ horizontal slats\u003c\/h3\u003e\n\u003cp\u003eInstall the 4″ × 3\/4″ × 6′ ALU40 slats consistently using the ordered 3\/8″ or 1\/2″ gap and secure the system with the specified channel and fastener components.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e05\u003ch3\u003eSet the 5″ two-way hinges\u003c\/h3\u003e\n\u003cp\u003eHang and align both leaves so they swing freely, maintain clearances and meet correctly at the center without forcing the frame.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e06\u003ch3\u003eSet stops, access hardware and automation\u003c\/h3\u003e\n\u003cp\u003eComplete the L-shape stopper, latch or access-control condition, then test both leaves. If automated, commission the operator and required safety devices as a complete gate system.\u003c\/p\u003e\u003c\/article\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n      Buying and project-planning guide\n      \u003ch2\u003eConfirm more than the width. A 12-foot double swing depends on support, swing geometry and hardware selection.\u003c\/h2\u003e\n      \u003cp\u003eThe listed gate size gives you the overall target, but the installation succeeds only when the two leaves, supports and access hardware are planned around the real site.\u003c\/p\u003e\n        \u003carticle\u003e01\u003ch3\u003eMeasure the opening\u003c\/h3\u003e\n\u003cp\u003eMeasure width and height at multiple points and confirm the finished dimension that the installed gate must serve.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e02\u003ch3\u003eCheck the swing arc\u003c\/h3\u003e\n\u003cp\u003eConfirm both leaves have clear travel and will not conflict with vehicles, walls, landscaping, slope or required access paths.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e03\u003ch3\u003eSelect the support posts\u003c\/h3\u003e\n\u003cp\u003eChoose the optional 3″ × 3″ HD support-post configuration based on actual structure, footing, exposure and gate-operator requirements rather than appearance alone.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e04\u003ch3\u003ePlan automation early\u003c\/h3\u003e\n\u003cp\u003eIf a swing operator will be used, select it before final hardware layout so attachment points, power, safety equipment and travel geometry are coordinated.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e05\u003ch3\u003eConfirm slat spacing and privacy\u003c\/h3\u003e\n\u003cp\u003eChoose the listed 3\/8″ or 1\/2″ ALU40 gap based on the desired visual coverage and openness, then confirm that configuration before assembly.\u003c\/p\u003e\u003c\/article\u003e\n        \u003carticle\u003e06\u003ch3\u003eConfirm finish and custom sizing\u003c\/h3\u003e\n\u003cp\u003eThe black ALU40 slat specification identifies AAMA 2604 super-durable powder coating. Custom colors, sizes and slat spacing are available for project-specific orders.\u003c\/p\u003e\u003c\/article\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n          Product videos\n          \u003ch2\u003eSee the Aluglobus gate system in motion.\u003c\/h2\u003e\n        \u003cp\u003eWatch the requested Aluglobus Aluminum Systems gate video for a closer look at the aluminum system and finished gate design. The YouTube player loads only after the visitor clicks the poster, reducing unnecessary page-load work.\u003c\/p\u003e\n        \u003carticle\u003e\n            \u003cbutton type=\"button\" data-video-src=\"https:\/\/www.youtube-nocookie.com\/embed\/XW_O-INjMrM?autoplay=1\u0026amp;rel=0\" data-video-title=\"Aluglobus Aluminum Systems ALU40 gate video\"\u003e\n              \u003cimg src=\"https:\/\/i.ytimg.com\/vi\/XW_O-INjMrM\/hqdefault.jpg\" alt=\"Play Aluglobus Aluminum Systems ALU40 gate video\" loading=\"lazy\"\u003e\n            \u003c\/button\u003e\n          \u003cstrong\u003eAluglobus Aluminum Systems\u003c\/strong\u003eRequested gate video\n        \u003c\/article\u003e\n  \u003c\/section\u003e\n  \u003csection id=\"alu40hd126-faq\"\u003e\n        Frequently asked questions\n        \u003ch2\u003eAnswers before you order or install the 12′ × 6′ black ALU40 Contractor Line gate.\u003c\/h2\u003e\n        \u003cp\u003eCommon questions about the 4″ HD frame, double-swing layout, 4″ ALU40 slats, 3\/8″ or 1\/2″ gap, 3″ HD posts, automation and black finish.\u003c\/p\u003e\n        \u003cdetails open\u003e\u003csummary\u003eWhat is the ALU40 Contractor Line 12′ × 6′ Double Swing Black gate?\u003c\/summary\u003eIt is a heavy-duty Contractor Line aluminum gate kit configured as a 12-foot-wide by 6-foot-high double swing system. It uses a 4-inch HD USA aluminum gate frame with black 4-inch ALU40 horizontal slats and the listed reinforced gate hardware.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eWhat size opening is this gate designed around?\u003c\/summary\u003eThe listed configuration is 12′ wide × 6′ high overall. Final installed clearances depend on the selected posts, hinges, center condition and project measurements, so the site opening should be verified before ordering.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eWhat components are specified with the gate kit?\u003c\/summary\u003eThe live listing identifies 24′ of 4-inch HD USA aluminum gate-frame material, inner corner bracket, channel kit, 6′ L-shape gate stopper, heavy-duty 5-inch two-way support hinge, basic cane bolt, #10 × 1″, #12 × 2″ black and #10 × 3\/4″ screws, a 2″ aluminum cap and black 6′ ALU40 slats.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eWhat gap options are listed for the ALU40 slats?\u003c\/summary\u003eThe product title lists a 3\/8″ or 1\/2″ gap. The tighter 3\/8″ rhythm provides slightly more visual coverage, while 1\/2″ creates a little more openness. Confirm the selected gap before assembly.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eCan the double-swing gate be automated?\u003c\/summary\u003eThe product description states that the gate can be configured to support swing-gate automation. The operator must be selected for the actual leaf size and weight, and the post, footing, attachment, power and safety-device requirements must be coordinated for the installation.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eWhat post sizes are shown for this Contractor Line gate?\u003c\/summary\u003eThe live product options show 3″ × 3″ HD support posts in 8′ and 12′ lengths, plus 3″ aluminum caps. Black and custom-color post options are listed. The correct support condition still depends on footing, exposure, gate use and automation.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eIs it suitable for residential and commercial projects?\u003c\/summary\u003eYes. The current page positions this gate for residential driveways, estate entrances, gated communities, commercial properties and other wide access points where the double-swing layout is appropriate.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eDoes the aluminum gate develop iron-oxide rust like steel?\u003c\/summary\u003e6063-T6 aluminum does not form iron-oxide rust like steel. The black ALU40 slat specification identifies AAMA 2604 super-durable powder coating for exterior protection. Routine cleaning is still recommended, especially in coastal or high-salt environments.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eHow long does an aluminum horizontal swing gate last?\u003c\/summary\u003eThe current listing does not publish a fixed service-life number. Long-term performance depends on correct structural installation, hinge and operator setup, exposure, use cycle and maintenance. Aluminum avoids the rust and rot mechanisms that commonly shorten the life of steel and wood gates.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eCan I order a custom color or custom size?\u003c\/summary\u003eYes. The product listing states that custom colors and custom sizes are available. Confirm the required opening, finish and hardware conditions with Aluglobus before ordering a nonstandard configuration.\u003c\/details\u003e\n        \u003cdetails\u003e\u003csummary\u003eIs the aluminum non-combustible?\u003c\/summary\u003eThe aluminum substrate is non-combustible and does not sustain flame like combustible materials. That material characteristic does not by itself certify the complete installed gate for every fire-code or defensible-space requirement, so project-specific compliance should still be confirmed.\u003c\/details\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n        Ready to specify the gate?\n        \u003ch2\u003eConfirm the 12′ × 6′ opening, supports and swing plan before the kit arrives.\u003c\/h2\u003e\n        \u003cp\u003eFor a standard manual installation, verify the finished opening, post condition and double-swing clearance. For automation or custom sizing, send the project information first so the gate, support and operator plan can be coordinated.\u003c\/p\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/contacts\/\"\u003eRequest project support ↗\u003c\/a\u003e\n          \u003ca href=\"#\"\u003eBack to product options ↑\u003c\/a\u003e\n  \u003c\/section\u003e\n  \u003csection\u003e\n          Project checkpoint\n          \u003ch2\u003eA 12-foot double swing is a system decision, not just a gate-size decision.\u003c\/h2\u003e\n          \u003cp\u003eBefore ordering, make sure the gate configuration matches the opening, supports, swing geometry and access-control plan.\u003c\/p\u003e\n            Finished opening width + height\n            Post size and support condition\n            Footing \/ base condition\n            Inside or outside swing direction\n            Clear swing area for both leaves\n            Manual or automated operation\n            Latch \/ lock \/ access-control requirement\n            3\/8″ or 1\/2″ ALU40 gap\n            Finish \/ custom color\n            Photos from both sides of the opening\n            Project city \/ state\n          Choose your next step\n          \u003ch3\u003eSend the opening before you commit to posts, hinges or an operator.\u003c\/h3\u003e\n          \u003cp\u003eFor a standard 12′ × 6′ gate, verify the real opening and swing area. For custom sizes, custom colors, automation or difficult support conditions, send the project measurements and photos so the configuration can be reviewed first.\u003c\/p\u003e\n            \u003ca href=\"https:\/\/aluglobusfence.com\/contacts\/\"\u003eReview my project ↗\u003c\/a\u003e\n            \u003ca href=\"tel:+18888763006\"\u003eCall (888) 876-3006\u003c\/a\u003e\n      Aluglobus Aluminum Systems · Aluminum gates · Fence systems · Patio covers · Wall cladding · Nationwide supply\n  \u003c\/section\u003e\n      \u003cbutton type=\"button\" aria-label=\"Close image viewer\"\u003e×\u003c\/button\u003e\n      \u003cbutton type=\"button\" aria-label=\"Previous image\"\u003e‹\u003c\/button\u003e\n      \u003cimg src=\"\" alt=\"\"\u003e\n      \u003cbutton type=\"button\" aria-label=\"Next image\"\u003e›\u003c\/button\u003e\n      \u003cp\u003e\u003c\/p\u003e","brand":"Aluglobus fence","offers":[{"title":"Default Title","offer_id":71156398555389,"sku":null,"price":2977.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/7102\/8221\/files\/Alu-40-HD-12x6-Pedestrian-Gate-Black-Horizontal.jpg?v=1786979330","url":"https:\/\/shopaluminumfence.com\/products\/aluminum-gate-kit-alu40-slat-contractor-line-12-x-6-double-swing-black","provider":"Aluglobus fence","version":"1.0","type":"link"}